The Brow Sculpting Set

Prior to treatment, ensure the brows are deep-cleansed, with all oils, makeup and tanning products removed. You can scrub and exfoliate your brows for a thorough cleanse.

Advise your client that this step is only recommended if they have coarse brow hairs that are hard to comb into place. If this doesn’t apply, they can skip to the next step. Once brows are dry, use Lamination Adhesive sachet to apply a thin layer across the base of the brows and comb hairs in an upward and angled direction.

Pro Tip: Brow Lamination Adhesive dries quickly, so make sure the product is brushed through immediately after applying. Brows need to be set in the preferred direction of lamination.

Once brows are dry, apply one sachet of Perming Solution, one brow at a time (1ml sachet covers both eyebrows). Use a dry cotton tip for application. Stroke the brow hairs in an upward angle using a clean Lamination Comb or Spoolie until satisfied with the shape. Place a film of the included Brow Wrap on the brows and leave covered to process.

• Very Thin or Fine Brow Hairs: 5-7 mins
• Medium or Normal Brow Hairs: 7-8 mins
• Coarse or Stubborn Hairs: 8-9 mins (no longer than 9 mins)

Slowly pull off Brow Wrap film and wipe off the Perming Solution from the brows, using a dry cotton tip.

Using another cotton tip, apply one sachet of the Fixing Solution, one brow at a time (1ml sachet covers both eyebrows). Place a new film of Brow Wrap over the brows. Be careful that your brow hairs don’t move out of place. Set and leave covered for 5 to 9 minutes, as per previous timing guide.

Slowly pull off Brow Wrap film and wipe off Fixing Solution from the brows, using a dry cotton tip.

Microwave the Brow Wax for 60-80 seconds until it melted (as a general texture guideline, you’ll know the wax is ready for use when it can be stirred). Use the spatula to mix wax and obtain a creamy consistency. Apply a thin layer of wax underlining the arch of each brow. Leave wax on skin for around 20 seconds while it sets and cools. Raise a small edge of the wax strip on the outer end and remove quickly in an inwards direction. This needs to be in the opposite direction of hair growth (from the ears to the nose).

Add equal parts of Tint and Cream Activator into the mixing dish, in a pea-sized amount. Mix using the Applicator Brush until it forms a creamy consistency. The paste will become darker in color once mixed thoroughly.

Pro Tip: If you have already completed a professional Brow Lamination treatment for your client or they intend to use Lustre Lamination, advise them that Brow Tinting will be enhanced on the skin due to increased color reception and faster processing times.

Apply the blended tint mixture to one brow at a time using the Applicator Brush. To ensure all the hairs are colored, spread the tint through the eyebrow evenly using a dry cotton tip.

After applying the tint, clean up any excess product by wiping off with a cotton tip and shape the brows to precision for a crisp finish.

Allow Tint to develop for 60 seconds and watch the shade process. For clients Tinting without a prior Brow Lamination, advised them of leave-in duration of up to 10 minutes.

Pro Tip: How long you leave the tint in will depend on how dark they would like the finished shade to be. The results will be darker the longer you leave it in.

Light Brown Brow Tint Processing Guide:

• For a Blonde shade, allow to process for 2-4 minutes
• For a Soft Brown shade, allow to process for 5-7 minutes

Natural Brown Brow Tint Processing Guide:

• For a Medium Brown Shade, allow to process for 2-4 minutes
• For a Natural Brown Shade, allow to process for 5-7 minutes
• For a Deep Brown Shade, allow to process for 10 minutes

Pro Tip: If wanting to achieve an ombre look, remove the tint from the beginning of the brows a few minutes before removing the ends.

Let both brows sit for advised processing time. Once finished, gently wipe off the tint using a moist cotton pad. Do this in an outwards motion and in only one direction to maintain the shape of the brows. Do not scrub back and forth, as this will remove the skin stain.

Apply one sachet of Keratin Nourish cream to each brow using a cotton tip (1ml sachet covers both eyebrows). Use a clean Lamination Comb or spoolie to brush the product evenly through. Remove after 2 hours with a dry cotton tip or pad.

Advise your clients that correct aftercare is important for freshly laminated and tinted brows.

• Keep brows dry for 24 hours
• Use the Brow Oil daily after the first 24 hours of curing time. This nourishing oil will nourish your skin and hair daily, ensuring the hair does not dry and/or curl.
• No makeup for 24 hours.
• Avoid swimming or any activity that may cause excess moisture.
• Stay away from direct sunlight.
• Do not apply Retin-A, AHA or exfoliant around the brow area for 24 hours either side of the treatment.
• Self-tanning products should be avoided on the face for 24 hours prior and 24 hours after treatment.
• If any stinging or swelling occurs, apply a cold compress to soother and seek medical advice.